Cat6 UTP Patch Cable

Home / Patch Cable / Cat6 Patch Cable / Cat6 UTP Patch Cable
cat6 utp patch cable

Cat6 UTP Patch Cable

Conductors: 24AWG or 26AWG or 28AWG stranded bare copper.
Insulation: polyolefin
Color code:

  • pair1:blue, white/blue
  • pair2:orange, white/orange
  • pair3:Green, white/Green
  • pair4:Brown, white/brown
Ripcord: under jacket
Jacket: pvc or LSZH
Standards: UL444/CSA-C22.2 No 214,Type CM EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cable
Applications: internet,computer
UTP: unscreen cable
STP: single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire
SFTP: Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid
Network cable Connector detail specification:

  • RJ45 8P8C nickel type
  • RJ45 8P8C golden type

Get A free Quote Now

    • ANSI/TIA/EIA-568-C.2 T568A & T568B
      ISO/IEC 11801 8-position conductor/pair assignment (1-2/3-6/4-5/7-8)
      Pair Identification Pair1= Blue/WhitePair2= Orange/WhitePair3= Green/WhitePair4= Brown/White
      Transmission Performance NSI/TIA-568-C.2: category 7 (1-750 MHz) specifications
      Cordage
      Constructor 4 pairs, 7 strands,26 AWG, SSTP (PiMF)
      Cable Type UTP Cat.6 Crossover Patch Cord
      Outer Cable Diameter 6.0mm ± 0.2 mm
      Outer Jacket PVC/LSZH Jacket
      Plug
      Type Shielded RJ45 8P8C Modular Plug
      Housing UL listed 94V-0/1/2 flame retardant polycarbonate
      IDC blades phosphor bronze, gold plating over 100 μin of nickel in contact area
      • Conductor Material OFC/CCC//CCA
      • Insulation 1.0mmHD-PE (High density polyethylene)
      • Number of Twisted Pair 4P
      • Shielding UTP/STP/SFTP
      • Ripcord yes/no Yes
      • Jacket PVC (Polyvinyl-Chloride) or LSZH (Low Smoke Zero Halogen)
      • The external cable diameter 5.6~6.0mm
      • Color different color is available
      • Operating temperature -20 ° C – +75 ° C
      • Color Code 1.Pair 1: white/blue-blue/white2.Pair 2: white/orange-orange/white3.Pair 3: white/green-green/white4.Pair 4: white/brown-brown/white
      • Delivery Detail 20~25days after receiving the deposit

    Send Us a Message

    Welcome to contact us by fill the right contact form or write to us directly by the contact info below:

    Send us a message if you have any questions or request a quote. Our experts will give you a reply within 12 hours and help you select the right product you want.






      Cat6 UTP Patch Cable, 100% Pure Copper, 23 AWG Stranded Cables

      We feature our unshielded Cat6 Cable to deliver fast ethernet (10/100BASE-T) and Gigabit Ethernet (1000BASE-T) at 250MHz bandwidth. Ethernet Cat6 UTP patch cords are made of four twisted pairs of copper wire terminated with RJ45 plugs at both ends. Cat6 UTP cables are approved for up 100m (328 ft) distance. We highly recommend using patch cords for up to 20 ft distance.

      OTSCABLES offer RJ45 Cat6 Ethernet Patch cable that can be connected using a punch-down, 110 block and modular connectors. Our Cat6 UTP Cable provides enhanced data transfer and lower crosstalk as compared to regular Cat5e cables.

      We deliver with quality and integrity as our Cat6 UTP cables meet and exceed ANSI/TIA-568-C.2 standards. Furthermore, all our quality, low priced cords are UL Listed, ETL Verified and RoHS Compliant. We carry non-booted and snagless booted strain relief unshielded Cat6 cables with a variety of colors to choose from.

      Cat6 Crossover UTP Patch Cable

      Our Cat6 UTP crossover patch cable is ideal for connecting PC to PC without hubs or switches. These are typically seen in network devices where two or three devices are connected directly. These have TIA/EIA 568A termination on one end and TIA/EIA 568B termination on the other.

      Cat6 UTP Ethernet Patch Cable, Non-Booted Crimped/Assembly Style

      Construction of OTSCABLES Cat6 Non-Booted Patch Cord

      Our Cat6 Non-booted UTP cables are constructed by stripping the cable into the standard patch cable length, and a 50-micron, gold-plated RJ45 connector is crimped unto the wires. A load bar is used to separate the cables and reduce crosstalks.

      Benefits

      Our non-booted Cat6 UTP patch cables are ideal for cramped up spaces where space-saving is a great deal. These are also ideal for simple applications and its more cost efficient than our booted cables.

      Applications

      You can easily install these cables in home and office applications, in modems, routers, servers, hubs, printers, switch boxes, gaming console, VoIP, computers and many more. Plus, our Ethernet Cat6 UTP cables are compatible with computer devices such as routers, patch panels, modems, switches and hubs.

      Cat6 Molded Snagless Boot, Strain-Relief UTP Patch Cables

      Construction of OTSCABLES Cat6 UTP Snagless Boot Patch Cord

      Our Unshielded Cat6 Snagless, molded strain relief boot is made by injection molding, where the jacket material of the cable is pushed right into the connector and around the individual wires. They are designed with secure and efficiently constructed release tabs.

      Benefits

      In this way, the cable and connector is protected and dislodging of the RJ45 connector from the cable is less likely to happen as the molded boot provides strain relief support for the RJ45 connectors.

      Applications

      Cat6 UTP with snagless boot, RJ45 connectors Patch Cable is best for applications requiring frequent connection and disconnection from the source in many data centers.